Korado Radik Plan VK

Home > Products > Heating > Radiators > Steel Panel Radiators > Korado Radik Plan VK

Steel panel radiator with flat front panel and right bottom connection

RADIK PLAN VK is a steel panel radiator in VENTIL KOMPAKT version which allows right bottom connection to a pressurized heating system. There are two upper and two lower hangers welded at the back side of the radiator. Radiators in length 1800 mm and more have six hangers. The only exception is panel radiators in height 200 mm which do not have any hangers welded at the back side.

Technical Data

Height (H)

200, 300, 400, 500, 600, 900 mm

Length (L)

400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600, 1800, 2000 mm

Depth (B)

 

- Type 11 PLAN VK

65 mm

- Type 21 PLAN VK

68 mm

- Type 22 PLAN VK

102 mm

- Type 33 PLAN VK

157 mm

Connecting pitch

50 mm

Connecting thread

6 × G½ inside

Highest allowed working pressure

10 bar

Highest allowed working temperature (°C)

110 °C

Radiator connection

right bottom

Pressure Loss

 

 

 

 

 

 

 

 

 

In case of two-pipe heating system it is necessary to calculate the correct level of valve presetting and specify this in the project documentation to ensure a proper function of the heating system. This must be kept by the installer during installation of the heating system.

 

In case of one-pipe heating system it is necessary to set the valve at level 6. For adjusting the required mass flow in the radiator we recommend to use the compact connecting fitting with a fixed or adjustable flow volume of water in the radiator.

© Technomec Engineering Co Limited. All Rights Reserved

|

|